 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number : ENN7721A CPH3236 CPH3236 Applications * NPN Epitaxial Planar Silicon Transistor DC / DC Converter Applications Relay drivers, lamp drivers, motor drivers, flash. Features * * * * * * * Adoption of MBIT processes. Large current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Narrow hFE range. Ultrasmall package facilitates miniaturization in end products(mounting height : 0.9mm). High allowable power dissipation. Specifications Absolute Maximum Ratings at Ta=25C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCES VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board(600mm2!0.8mm) Conditions Ratings 100 100 50 6 3 6 600 0.9 150 --55 to +150 Unit V V V V A A mA W C C Electrical Characteristics at Ta=25C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Symbol ICBO IEBO hFE fT Conditions VCB=40V, IE=0 VEB=4V, IC=0 VCE=2V, IC=100mA VCE=10V, IC=500mA Ratings min typ max 0.1 0.1 250 380 400 MHz Unit A A Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 22004 TS IM / D0503 TS IM TA-100857 No.7721-1/4 CPH3236 Continued from preceding page. Parameter Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol Cob VCE(sat)1 VCE(sat)2 VBE(sat) V(BR)CBO V(BR)CES V(BR)CEO V(BR)EBO ton tstg tf Conditions VCB=10V, f=1MHz IC=1A, IB=50mA IC=2A, IB=100mA IC=2A, IB=100mA IC=10A, IE=0 IC=100A, RBE=0 IC=1mA, RBE= IE=10A, IC=0 See specified test circuit. See specified test circuit. See specified test circuit. 100 100 50 6 35 300 22 Ratings min typ 13 60 105 0.88 100 160 1.2 max Unit pF mV mV V V V V V ns ns ns Marking : DG Package Dimensions unit : mm 2150A 2.9 0.4 0.6 Switching Time Test Circuit IB1 OUTPUT IB2 VR 50 + 100F + 470F VCC=25V RB PW=20s D.C.1% 0.2 0.15 3 INPUT RL 0.05 1.6 2.8 1 1.9 2 0.6 0.7 0.9 1 : Base 2 : Emitter 3 : Collector SANYO : CPH3 VBE= --5V IC=10IB1= --10IB2=1A 0.2 3.0 IC -- VCE mA 60 40m A 3 IC -- VBE VCE=2V 2.5 Collector Current, IC -- A 20mA 2.0 Collector Current, IC -- A 15mA 8mA 10mA 6mA 4mA 2 1.5 1.0 1 2mA 0.5 0 0 IB=0 0.2 0.4 0.6 0.8 1.0 IT06999 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Collector-to-Emitter Voltage, VCE -- V Base-to-Emitter Voltage, VBE -- V Ta=75 C 25C --25C IT07000 No.7721-2/4 CPH3236 7 hFE -- IC VCE=2V 3 2 VCE(sat) -- IC IC / IB=20 5 DC Current Gain, hFE 3 Ta=75C 25C Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 0.1 7 5 --25C 2 3 2 =7 Ta C 5 C 5 --2 25 C 100 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 0.01 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 Collector Current, IC -- A 5 3 2 IT07001 3 VCE(sat) -- IC Collector Current, IC -- A IT07002 VBE(sat) -- IC IC / IB=50 IC / IB=50 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V Base-to-Emitter Saturation Voltage, VBE(sat) -- V 2 0.1 7 5 3 2 1.0 = Ta 7 C 5 Ta= --25C 7 C --25 25 C 75C 5 25C 3 2 0.01 0.01 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 2 3 5 7 0.1 2 3 5 7 1.0 2 3 57 IT07004 Collector Current, IC -- A 7 5 IT07003 7 fT -- IC Collector Current, IC -- A Cob -- VCB VCE=10V f=1MHz Gain-Bandwidth Product, fT -- MHz 3 2 Output Capacitance, Cob -- pF 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 5 100 7 5 3 2 3 2 10 0.01 10 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 Collector Current, IC -- A 10 7 5 IT07005 1.0 0.9 ASO Collector-to-Base Voltage, VCB -- V 5 7 100 IT07006 PC -- Ta ICP=6A IC=3A 10s Collector Dissipation, PC -- W Collector Current, IC -- A 3 2 1.0 7 5 3 2 0.1 7 5 3 2 1m s 50 10 s 0 0 s M 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 ou 10 DC 10 nt m ed s on op 0m ac s er am er ati ic on bo ar d (6 00 m m2 ! 0. 8m 0.01 0.1 Ta=25C Single pulse Mounted on a ceramic board (600mm2!0.8mm) 2 3 5 7 1.0 2 3 5 7 10 2 3 m ) Collector-to-Emitter Voltage, VCE -- V 5 7 100 IT07007 0 20 40 60 80 100 120 140 160 Ambient Temperature, Ta -- C IT07008 No.7721-3/4 CPH3236 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 2004. Specifications and information herein are subject to change without notice. PS No.7721-4/4 |
Price & Availability of CPH3236
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |